12 Volt
10 Amps Maximum Per Circuit
30 Amps Maximum Per Panel
5 Illuminating Switches
O.D.: 6-1/2" x 4-1/2"
- Connect the positive terminal of the battery (12V only) to the red
wire identified with a "+" tag.
- Connect the negative terminal of the battery (or ground) to the
black wire identified with a "-" tag.
- Connect the positive wire of each individual circuit to the #1 spade
on the corresponding rocker switch on the panel.
- Connect the remaining wire or negative wire of each circuit to the
common ground of the boat, if so equipped, or directly to the
negative terminal of the battery or the negative wire of the panel.
- Each panel comes complete with 5 individual circuit breakers. If desired,
the breakers can be easily removed and switched with other breakers on
the panel to raise or lower the amp rating or the individual circuits (do not
exceed maximum of 10 amps per circuit, and maximum of 30 amps per panel).
Additional breakers can also be ordered from your local marine supplier.
- Included with each panel are 20 stick-on lables to allow customizing the circuit
descriptions to meet requirements. Lables are LED back lighted.
|
