O.D.: 6-1/2" x 4-1/2"
12 VOLT
6 ILLUMINATING SWITCHES
40 Amps MAXIMUM PER Panel
10 Amps MAXIMUM PER Circuit
- Connect the red wire marked "+" to the positive side of the battery.
- Connect the black wire marked "-" to the negative side of the battery.
- Run the positive wire from each circuit to be powered to the terminal clip
marked 2 on each toggle switch. Run the negative wire from each circuit
directly to the negative side of the battery, or to a common ground on the
boat if so equipped or to a grounding block.
- Each panel comes prewired with 6 individual circuit breakers. If desired, the
breakers can be easily removed and switched with other breakers on the
panel to raise or lower the amp rating of the individual circuits (do not
exceed maximum of 10 amps per circuit). Additional breakers can also be
ordered from your local marine supplier.
- Each panel comes preprinted with four circuits and two auxiliary circuits.
Included with each panel are 20 additional stick-on labels which can be
used to change the circuit descriptions to meet your requirements.
|
